HOW TO PUT THE KEY LOCK iPON the LG KP500:
Required: Download all 3 files in the link: http://www
. mediafire.com /? sharekey = befb514e1ee2fb7467cd7f7bd65f7eef7b40454201aba38cc95965eaa7bc68bc
Note: The following tutorial is created to run on Windows XP. But it works on Windows Vista and Windows 7 most of the time! ;)
NOTE: before any operation, set the classic menu item in the Display
1) Download everything you need (see above link) and install the file Setup Driver
2) Extract the content of "'LG-Utils" on the desktop
3) Install WinImage
4) Now you should have the file on the desktop "LG KP500.flb"
5) WARNING: Now move the file "LG KP500.flb" in the directory "C:". DO NOT MOVE IN ANY FOLDER (THE "SOFTWARE") BUT MUST APPEAR IN THE LIST OF FILE UNIT '"C"
6) Now you have to turn your cell and LG Cookie RIMUOTEVE THE BATTERY. If you do not, you could "brick" the phone rendering it useless.
7) Connect your phone to a computer's USB port. MAKE SURE YOUR PHONE IS OFF AND THE BATTERY HAS BEEN REMOVED!
8) Once the cell connected to the computer, Windows will recognize the device XP/Vista/7 and say "E 'found new hardware" and automatically install as "flash device"
9) Now disconnect the cell from USB
10) Restart your computer now.
11) Now open the program from the desktop "KP500-Utils.exe"
12) very important and fundamental: do a copy of your phone and its CUST (the system folder of the cell) edit this file and if something goes wrong, you can retrieve your cell!
To do so: Open-
"KP500-Utils.exe"
-D and then press ENTER
-type \\ \\. \\
USB1 and press Enter - Now you ask the "Sec-pack file: you type C: \\ and press ENTER KP500.flb
- You will be asked "DATA FILE": you type C: \\ CUST2 but DO NOT press enter
- Before you press ENTER, make sure the cell is switched off and without battery, USB cable is connected to a computer but not with the phone
- Now quickly connect the USB cable the cell, wait for Windows to recognize the device emits a sound and press ENTER after the program.
NB: you must be extremely fast in this step, otherwise it will not start up. Try again until it does;)
- After a bit 'should say "Open Port PLUG THE PHONE ..." and then "Sec-pack file sended"
-Now wait and after a while' minutes you will have your BACKUP. Then unplug the cell when KPutils LG has finished!
13) IMPORTANT: CUST2 Copy the file you just created on a flash drive or CD. You have to want: Just make sure you have many backups!
14) Now that you have the original CUST your cell, we can begin to change the theme! Open WinImage and do File / Open and select the file CUST2. So you should appear to the left some folders including LGAPP.
15) NOW DOWNLOAD THE BLOCK TASTIREA IPHONE: http://www.megaupload.com/?d=QM69ID5N
16) CUST in your folder is opened with WinImage DMF. This folder should be deleted Idle_Keylock.dmf Fail Fail.
17) and replace it with the downloaded
18) After all the changes made to your phone, save the CUST2 opened with WinImage and rename it to THEME (no extension!)
19) Move (or copy) the file THEME folder "C:" where there is also the file "LG kp500.flb"
20) Open again "KP500-utils-En"
-Press C and then ENTER
-type \\ \\. \\ ENTER
USB1 and after-Write C: \\ kp500.flb and after
ENTER - Type C: \\ THEME but do not press Enter yet!
21) Before you press ENTER, the cell connected quickly, wait until your PC recognizes the device (will sound the same as that sounds when you plug in a USB stick) and then press ENTER.
22) Wait until the program ends for about 10 minutes and here you have your new theme! ;)
23) If The first time you try to send the issue with KP500-utils-En not appear and an error, try again until you perform the operation successfully! ;)
0 comments:
Post a Comment